• Releasit Bio-Encap GREEN Encapsulation Detergent - (4 Gallon) [Encap]

Commercial carpet cleaners are often asked to use greener products, but the carpet still has to come clean. Releasit Bio-Encap was built for both sides of that equation. It combines carefully selected ingredients with low-moisture encapsulation cleaning to minimize environmental impact without backing away from cleaning performance. Green doesn't have to be wimpy.

• Cleans about 39,600 square feet: At 4 ounces per gallon of water, the concentrate combines with 128 gallons of water to produce 132 total RTU gallons. At approximately 300 square feet per RTU gallon, that provides about 39,600 square feet of coverage.
• Uses carefully selected ingredients: Bio-Encap is formulated with ingredients chosen with safety and environmental impact in mind, including the CRYSTALON-bp encapsulation bio-polymer.
• Uses far less water than hot water extraction: The low-moisture process cleans carpet without flooding the fibers, shortening dry times and reducing water consumption.
• Creates no wastewater from the cleaning process: There is no extraction tank to empty and no contaminated cleaning water that must be sent into the sewage system.
• Delivers real encap cleaning performance: CRYSTALON-bp encapsulates soil and holds it in suspension until normal post-vacuuming. On heavily soiled areas, additional scrubbing passes can be made without applying more solution.
• Leaves a soil-resistant residue: The detergent dries to a non-sticky crystal that will not attract additional soil, helping the carpet remain easier to maintain between cleanings.

Shampoo or encapsulation cleaning: Shake well. Mix 4 ounces per gallon of hot water and scrub with overlapping passes. A light whitening of thin foam is sufficient. On heavier soil, make additional scrubbing passes without applying more solution. Do not rinse. Vacuum at the next scheduled interval to recover the encapsulated soil.

Traffic-lane pre-spray: Mix 8-10 ounces per gallon. Bonnet or pad cleaning: Mix 4-6 ounces per gallon and clean with overlapping passes using a damp bonnet or pad. Recurring spills: Mix one part Bio-Encap with two parts water, spray the spill, and brush the solution through the fibers.

Bio-Encap performs best when shower-fed and can be used with Cimex machines, orbital scrubbers, CRB machines, 175 RPM rotary scrubbers, and bonnet or pad methods. It has a concentrate pH of 8.5-9 and is suitable for colorfast wool and synthetic carpet fibers. Test for colorfastness before cleaning.

Choose Bio-Encap when your customers want a greener approach and you need a commercial carpet cleaner that can still deliver. It uses less water, creates no wastewater, requires no rinse step, and cleans with the performance you expect from Releasit.