Encapsulation Carpet Cleaning Products.
Releasit Encap-HydrOx is a total carpet cleaning system that handles a wide range of carpet care needs.
With its hydrogen fortified encapsulation formula, Encap-HydrOx is a unique 7-in-1 textile cleaning product:
1. Encap-HydrOx is an encapsulating shampoo.
2. Encap-HydrOx is an encapsulating bonnet/pad cleaner.
3. Encap-HydrOx is an encapsulating hot water extraction detergent.
4. Encap-HydrOx is an encapsulating spotter.
5. Encap-HydrOx is an encapsulating traffic lane cleaner.
6. Encap-HydrOx is an encapsulating de-browner.
7. Encap-HydrOx is an encapsulating upholstery cleaner.
Releasit Encap-HydrOx is an e environmentally friendly product. It's formulated with a special peroxide-stable encapsulation polymer that crystallizes beautifully. Encap-HydrOx adds OXYGEN to the cleaning to loosen protein based soil and remove browning. Encap-HydrOx can be used in a wide variety of cleaning applications!
Releasit Encap-HydrOx combines a highly effective hydrogen peroxide detergent blend with a special crystallizing polymer. The crystalizing polymer captures soil. Encapsulated residue that is left in the carpet following cleaning can be extracted from the carpet during the routine post-vacuuming process.
The unique crystallizing encapsulation polymer in Releasit Encap-HydrOx resists re-soiling. The micro-encapsulated soil particles will not reattach to the carpet fiber. Carpets that are cleaned with Encap-HydrOx stay clean longer than with traditional detergents.
Dries to a crystallized residue. No rinsing is required. Non-sticky encapsulated residue will not attract more soil. Carpets stay clean longer. Safe for stain-resist, most wool, and all synthetic fibers.
Encap-HydrOx helps reduce contaminants associated with indoor air pollutants. Encap-HydrOx also neutralizes many odors naturally.
Encap-HydrOx has powerful protein spot removal capabilities. Encap-HydrOx removes Blood, Coffee, Chocolate, Red Wine, Urine Stains, Soft Drinks, Food Stains, and more.
Shampoo Encap Method: Mix Encap-HydrOx at 10 oz per gallon of warm or hot water. Apply with a coarse tip sprayer or with a shower-feed solution tank. Scrub the carpet thoroughly making overlapping passes with a Cimex, rotary, or cylindrical brush machine. Rinsing is not required. Vacuum at the next scheduled vacuuming interval.
Traffic Lane Pre-Spray: Mix Encap-HydrOx at 12 oz per gallon. Apply with a pump or battery powered sprayer using a coarse spray tip. Apply a heavier amount in more soiled areas. Allow 5-10 minutes of dwell time.
Hot Water Extraction: Mix Encap-HydrOx at 1-2 oz per gallon in portable extractors. For truckmounts mix 1
quart per 5 gallons of stock solution.
Protein Spot Removal: Mix 1 part Encap-HydrOx with 3 parts water. Apply a liberal amount of the spotting mixture to the spot. Allow 5-10 minutes of dwell time. Blot with a towel. Rinsing is not normally required.
Browning Treatment: Mix Encap-HydrOx at 20 oz per gallon. Spray the affected area thoroughly. Allow 10 minutes of dwell time. Clean using minimal moisture, and dry the area quickly!
Upholstery Shampoo: Mix Encap-HydrOx at 10 oz per gallon of warm or hot water. Apply evenly using a coarse tip sprayer. Brush the fabric gently with a horse hair brush or equivalent SOFT bristled brush. Gently towel off the upholstery or extract with a clear water rinse.
| ||Calcium chloride is commonly used in place of salt for melting ice and snow. Calcium chloride is hygroscopic (readily takes up and retains moisture). If you attempt to clean it with an alkaline detergent it will turn to calcium hydroxide (lime). The white powder residue from calcium chloride will track through the building; and since it attracts moisture, the residue can rapidly cause intense soiling. It is imperative to remove calcium chloride as quickly as possible. |
Here's a simple remedy for dealing with ice melt residue in carpet:
1. If the carpet is dry, vacuum slowly and thoroughly.
2. If the carpet is damp, blot and/or bonnet clean with microfiber bonnets.
3. Apply Encap-HydrOx following the "pre-spray" dilution on the label.
4. Brush ample Encap-HydrOx into the carpet, and allow 10 minutes of dwell time.
5. Extract and/or bonnet clean (with microfiber bonnets) using Encap-HydrOx.